Worm gear winch 250 – 1,500 kg

The worm gear winch with a load capacity of 250 to 1,500 kg has a gear unit consisting of a worm shaft and a wheel. Due to the fact that this gear causes friction losses, it already delivers 50% of the braking effect. The load pressure brake delivers the other 50%. The combination of braking system and robust design results in a very safe manual hoisting and pulling winch.

Product features:

  • Robust construction
  • Mainly used for lifting, including pulling loads
  • The braking mechanism consists of 50% friction in the worm gear and 50% a load pressure brake
  • Static minimum safety factor 4
  • Adjustable and recoil-free crank
  • All rotating parts run in maintenance-free bearings
  • The numbers in the product name correspond to the lifting capacities on the first cable layer
  • The pulling force is approx. 2.5 times the lifting capacity
  • Cable exit up, down and back possible
  • Standard paint in gray (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M

Worm gear winch 250 - 1,500kg
Technical detailsWW250WW500WW1000WW1500
Load capacity 1st rope layer
(kg)
2505001.0001.500
Load capacity of the last rope layer
(kg)
92224527846
Crank force, 1st rope layer
(Dan)
6101314
Stroke at 1st rotation
(mm)
1720139
Max. Rope take-up
(m)
104786341
Rope diameter
(mm)
46810
Min. breaking load
(kN)
9173451
Own weight (kg)9.512.012.023.0

Options and accessories:

  • GD = grooved cable drum
  • EV = galvanized finish with at least 6 microns
  • EX = ATEX certified for zones 2 and 22
  • XD = Several (X) rope areas possible
  • Steel rope or stainless steel cable with eyelet and / or hook
  • Pulley blocks
  • Suitable for air and electric motor drives